Proper alignment of the pump shaft with the driver can reduce vibration and significantly improve reliability. For appropriate applications, the time, expertise and instruments needed to achieve precision alignment (tolerances of less than 0.005 in) will prevent seal leakage and extend bearing life.
Topic Sponsor
Top Motors Articles
Following the development of variable frequency converter drives during the 1990s, totally enclosed fan-cooled (TEFC) AC induction motors became viable options for replacing DC motors in pumping applications. The torque and speed characteristics of these motors are a close match to those required for centrifugal pumps.
Advanced motor protective relays provide superior protection for motors and pumps. pump system optimization
The global economic downturn has resulted in an unprecedented attempt by world governments to help stimulate their individual economies, with the hope that these combined efforts will have a cumulative effect of breaking the downward spiral and lifting the global economy out of its crisis.
Couplings are often forgotten until a project is nearing its end. With time running out, users often purchase whatever a supplier has in stock instead of the best solution for the system. Understanding the application and requirements for coupling selection allows the user to select the best coupling solution.
Significant energy and money savings are realized when using variable speed motors controlled with drives.
Editor's Note: Click here to see a sample alignment data form.
Proper alignment of the pump shaft with the driver can reduce vibration and significantly improve reliability. For appropriate applications, the time, expertise and instruments needed to achieve precision alignment (tolerances of less than 0.005 in) will prevent seal leakage and extend bearing life.
Named for a technique commonly used on failing pumps, "percussion maintenance" - where a technician beats on the pump's stalled motor with a hammer or rubber mallet - often indicates motor deficiencies in his diaphragm pump. Though it is impossible for the maintenance department to predict when a pump will stall, such maintenance techniques are often the result of poor motor design.
Improved motor starters help Fabri-Kal achieve its green vision.
All electric motors (motors) have a housing that contains the working components of the motor. In the U.S., the enclosure describes this housing. The enclosure should meet specific environmental requirements for restricting foreign objects, such as water, dust, and tools, and safety requirements for personal protection. Depending upon the extent of containment, cooling considerations add to the design of the enclosure.
Latest Motors Articles
Electric motors have had a huge impact on the pump industry.
Improved motor starters help Fabri-Kal achieve its green vision.
Last September, we spoke about the importance of pipe-to-piping alignment, evaluating actual numbers, and tabulating stress values as they approach yield stress of pipe at various values of misalignment. This time, we will discuss the effects of pump-to-motor misalignment, beyond hype or generalities, by numerically quantifying the conclusions.
As a follow up on my AC Motors series, I thought it would be a good idea to provide a short overview of work, power and torque as it applies to the AC motor.
It is impossible to balance line-to-line voltages perfectly in a three-phase circuit. In fact, line voltages typically differ by a few volts or more, but a difference that exceeds 1 percent can lead to serious trouble on the plant floor. To maintain peak energy efficiency and thwart premature failure of three-phase motors, install adequate protective devices and periodically check for voltage unbalance at the motor terminals.
Last September, we spoke about the importance of pipe-to-piping alignment, evaluating actual numbers, and tabulating stress values as they approach yield stress of pipe at various values of misalignment. This time, we will discuss the effects of pump-to-motor misalignment, beyond hype or generalities, by numerically quantifying the conclusions.
In the past year, the rate of acceleration in the cost of raw materials (including steel, iron ore, copper and aluminum) has reached unprecedented levels in the pump and rotating equipment industries.
Due to the delicate nature of the cranberry, pump failure is not an option.
In the past year, the rate of acceleration in the cost of raw materials (including steel, iron ore, copper and aluminum) has reached unprecedented levels in the pump and rotating equipment industries.
Industry News
Columns and Blogs
The performance of a centrifugal pump with a trimmed impeller will follow the affinity laws as long as that trim is relatively small.
Standards for repair will begin with a standard for vertical turbine pumps.The pump industry is undergoing renewed interest in the technical aspects and quality of repairs.
Charlie Jackson was unaware of any centrifugal pump manufacturer that knew how to calculate hydraulic axial thrust produced within liquid ends of their pumps.
