Consider a typical ANSI-dimensioned 1x1.5-6 pump, as discussed in the P&S August article. The performance curve showed the BEP flow at around 100 gpm. The ANSI designation 1x1.5 means that the discharge flange is 1 in and suction 1.5 in. Why and how do manufacturers select such dimensions for a particular flow rating? Why did they not select and base their performance coverage charts on a 3x4-8 size for the 100 gpm?
Topic Sponsor
Top Piping Articles
Good suction piping design must eliminate air entrainment in the liquid, minimize friction loss, provide straight and uniform flow at the pump inlet and avoid excessive forces due to pipe strains at the pump.
If any silver linings exist for the economic crisis that has gripped the United States since last summer, one is the heightened public and governmental awareness about the nation's need for infrastructure improvements-a situation that American industry had watched grow without proper attention in recent years.
Reducing the causes of friction and choosing the proper pump will increase efficiency and cost-savings.
Editor's Note: Due to the high number of responses from our readers for more information regarding valve applications in "Surge Control in Pumping S
Have you ever wondered why the pressure exerted by a column of liquid has absolutely nothing to do with its volume or, for that matter, the geometric shape of its container?
Two readers responded to “Thermal Stress Affects Pipe Forces on Pumps”.
Two decades ago, EST Associates, Inc. started operations in Needham, Mass., to provide the New England area with environmental sampling and related monitoring services.
Last month, we discussed applications of low head axial flow pumps ("Field Testing: Theory vs. Reality," Pumping Prescriptions, May 2007). Knowing your system is very important for these types of units. For example, consider a recent application where neglecting the system caused problems.
Latest Piping Articles
Two readers responded to “Thermal Stress Affects Pipe Forces on Pumps”.
Editor's Note: Due to the high number of responses from our readers for more information regarding valve applications in "Surge Control in Pumping S
Soils with high concentrations of clay and silt can wreak havoc on construction sites, drain pipes, sewers and pumps. Users working with soils might want to consider geotextiles as a preventive maintenance alternative.
With continuously increasing energy costs, pump manufacturers must provide energy efficient solutions for fluid transfer. Besides hydraulically optimizing current technology, manufacturers are launching a number of new, highly efficient electrical drives and powerful control systems.
How many gallons per minute are REALLY flowing out of that pump?
Today's pipe stress analysis software provides engineers with a tool for designing complete piping systems and performing structural analysis in compliance with ASME and other well-known piping codes. The typical PC-based software is easy to use with spreadsheet inputs and quick reporting. It has facilitated the design to analyze iteration cycle and enabled the engineers to quickly create better and more reliable piping systems.
Consider a typical ANSI-dimensioned 1x1.5-6 pump, as discussed in the P&S August article. The performance curve showed the BEP flow at around 100 gpm. The ANSI designation 1x1.5 means that the discharge flange is 1 in and suction 1.5 in. Why and how do manufacturers select such dimensions for a particular flow rating? Why did they not select and base their performance coverage charts on a 3x4-8 size for the 100 gpm?
If any silver linings exist for the economic crisis that has gripped the United States since last summer, one is the heightened public and governmental awareness about the nation's need for infrastructure improvements-a situation that American industry had watched grow without proper attention in recent years.
Have you ever wondered why the pressure exerted by a column of liquid has absolutely nothing to do with its volume or, for that matter, the geometric shape of its container?
Industry News
Columns and Blogs
The performance of a centrifugal pump with a trimmed impeller will follow the affinity laws as long as that trim is relatively small.
Standards for repair will begin with a standard for vertical turbine pumps.The pump industry is undergoing renewed interest in the technical aspects and quality of repairs.
Charlie Jackson was unaware of any centrifugal pump manufacturer that knew how to calculate hydraulic axial thrust produced within liquid ends of their pumps.
