Topic Sponsor
Top Piping Articles
Many pipeline systems throughout the U.S. are in need of maintenance, but this maintenance is often pushed back because there is no way to properly shut down the system. Not any more. Time to gain control of your system.
New heat activated epoxy-based materials are now being used to repair leaking and corroded pipe work when operations are unable to shut down.
Corrosive, aggressive soil had eaten through a 35 year old ductile iron pipeline in the Port of Tampa area, causing a multitude of leaks that could not be repaired. Replacing the rotten pipe with more iron would have been costly and shortsighted. The radical environment required polyvinyl chloride (PVC) piping.
Industrial processes that manufacture, transfer, and distribute a variety of liquefied natural gases, from propane to oxygen to ammonia, require components to protect both the piping system and the pipe supports from the extremely cold temperatures. Pipe supports and piping that are not insulated may become brittle and crack, posing high risk to the piping and structural components.
Soils with high concentrations of clay and silt can wreak havoc on construction sites, drain pipes, sewers and pumps. Users working with soils might want to consider geotextiles as a preventive maintenance alternative.
This past summer I received a suggestion from a Pumps & Systems reader to discuss siphons and their effect on pump head and pipeline flow. If you are like me, your first experience with one of these devices probably led to your first - and hopefully last - taste of gasoline. The siphon is an example of a natural and extremely simple machine that we take advantage of daily.
With continuously increasing energy costs, pump manufacturers must provide energy efficient solutions for fluid transfer. Besides hydraulically optimizing current technology, manufacturers are launching a number of new, highly efficient electrical drives and powerful control systems.
Polyurethane coating technology is commonly chosen for demanding exterior applications such as bridges, stadiums and other large structures. When maintenance was required inside the Hammond Water Filtration Plant in Hammond, Ind., a moisture-cured polyurethane system proved the only way to coat more than 35,000- sq ft of piping and valves.
How many gallons per minute are REALLY flowing out of that pump?
Latest Piping Articles
With production time and cash flow at an all time premium, more companies are looking for time and cost saving alternatives to replacing slightly damaged assets.
Many pipeline systems throughout the U.S. are in need of maintenance, but this maintenance is often pushed back because there is no way to properly shut down the system. Not any more. Time to gain control of your system.
Corrosive, aggressive soil had eaten through a 35 year old ductile iron pipeline in the Port of Tampa area, causing a multitude of leaks that could not be repaired. Replacing the rotten pipe with more iron would have been costly and shortsighted. The radical environment required polyvinyl chloride (PVC) piping.
Good suction piping design must eliminate air entrainment in the liquid, minimize friction loss, provide straight and uniform flow at the pump inlet and avoid excessive forces due to pipe strains at the pump.
Soils with high concentrations of clay and silt can wreak havoc on construction sites, drain pipes, sewers and pumps. Users working with soils might want to consider geotextiles as a preventive maintenance alternative.
With continuously increasing energy costs, pump manufacturers must provide energy efficient solutions for fluid transfer. Besides hydraulically optimizing current technology, manufacturers are launching a number of new, highly efficient electrical drives and powerful control systems.
How many gallons per minute are REALLY flowing out of that pump?
Today's pipe stress analysis software provides engineers with a tool for designing complete piping systems and performing structural analysis in compliance with ASME and other well-known piping codes. The typical PC-based software is easy to use with spreadsheet inputs and quick reporting. It has facilitated the design to analyze iteration cycle and enabled the engineers to quickly create better and more reliable piping systems.
Columns and Blogs
In this multi-part series, we will investigate several aspects of centrifugal pump efficiency.
First of Five Parts
Since the original publication of this draft standard in the January 2008 issue of Pumps & Systems, I have received feedback, encouragement, numerous questions and criticism. The draft listed three basic levels of repair.
The McGraw-Hill scientific dictionary [5] states that a volute is "a spiral casing for a centrifugal pump... designed so that speed will be converted to pressure."
