Source: U.S. Census Bureau, Summary of Shipments of Pumps (2008)
(Note: NR = Not Reported)
Industry Summary
|
Units Shipped in 2008
|
Value of Shipments (in 1000s)
|
Pct. Change in Value from 2007
|
|
|
|
|
| Industrial pumps, value of drivers |
NR |
$4,835,378 |
5.00% |
| Industrial pumps, value of drivers |
NR |
641,881 |
10 |
| Domestic water systems, including drivers |
1,827,721 |
325,168 |
14.9 |
| Domestic sump pumps, including drivers |
3,290,814 |
221,380 |
14.5 |
| Oil-well and oil-field pumps (excluding boiler feed) |
NR |
782,919 |
15.7 |
| Other pumps, including drivers |
3,556,311 |
582,689 |
31.7 |
| Parts and attachments for pumps and pumping equipment |
NR |
1,707,215 |
6.5 |
| Air and gas compressors |
NR |
4,826,059 |
12.8 |
|
|
|
|
Centrifugal Pumps
|
|
|
|
| Sewage type (nonsubmersible), vertical or horizontal with nonclog impeller: |
|
|
|
| 12" and under |
NR |
NR |
NR |
| More than 12" |
241 |
$18,165 |
10.8 |
| Submersible effluent pumps (less than 1" solids handling capacity): |
|
|
|
| Less than 1 hp |
301,410 |
45,255 |
9.9 |
| 1 hp and over |
19,197 |
14,440 |
0.3 |
| Submersible solids handling pumps (solids 1" to 2" inclusive): |
|
|
|
| 1/2 hp and under |
404,862 |
75,562 |
7.1 |
| More than 1/2 hp |
64,178 |
29,157 |
23 |
| Submersible nonclog pumps (greater than 2" solids handling capacity): |
|
|
|
| 3" discharge and under |
9,257 |
10,028 |
22.9 |
| Discharge more than 3" but less than 7" |
19,631 |
58,093 |
24.0 |
| 7" and over discharge |
658 |
9,848 |
1.8 |
| Submersible grinder pumps (incorporating a hardened stainless steel cutter mechanism to macerate the solids into a fine slurry) |
|
|
|
| 2 hp and below |
70,185 |
96,150 |
20 |
| More than 2 hp |
7,802 |
13,159 |
10.9 |
| Single and two stage, single and end suction, close coupled with driver |
1,167,857 |
200,834 |
4.6 |
| Single stage, single suction, vertical, in-line frame |
9,832 |
30,578 |
36 |
| Single stage, single suction, frame or foot mounted, metallic pumps (built to National or International Standards ANSI B73.1or ISO 2858) |
90,957 |
283,677 |
12.4 |
| Single stage, single suction, frame or foot mounted, nonmetallic pumps (built to National or International Standards ANSI B73.1or ISO 2858) |
2,420 |
14,495 |
36.6 |
| Single stage, single suction, frame or foot mounted, non-ANSI, non-ISO, with or without recessed impeller: |
|
|
|
| Discharge more than 1", up to 2" |
21,760 |
20,639 |
9.9 |
| Over 2" discharge |
39,231 |
101,421 |
0.5 |
| Single stage, axially split, double suction: |
|
|
|
| 4" discharge and under |
5,278 |
28,537 |
27.1 |
| Discharge more than 4", up to 8" |
11,751 |
68,936 |
6.9 |
| Over 8" discharge |
3,504 |
120,342 |
15.4 |
| Single stage, radially split, double suction impeller pumps, API compliant |
89 |
10,455 |
NR |
| Multistage, single or double suction, diffuser design, radially split case |
19,804 |
121,440 |
NR |
| Multistage, single or double suction, volute or diffuser design, axially split case |
1,764 |
67,711 |
13.3 |
| Sealless centrifugal pumps, magnetic drive |
582,890 |
66,435 |
34.7 |
| Sealless centrifugal pumps, canned motor |
NR |
NR |
NR |
| Propeller and mixed flow, horizontal and vertical: |
|
|
|
| 36" and under |
1,038 |
32,459 |
40.5 |
| Over 36" |
302 |
38,396 |
27.5 |
| All other centrifugal pumps |
2,472,226 |
317,312 |
16.1 |
|
|
|
|
|
Vertical Turbine Pumps
|
|
|
|
| Vertical turbine pumps not exceeding 36" discharge, including deep-well: |
|
|
|
| Pump with submersible motor |
|
|
|
| Bowl diameter 6" and under |
17,839 |
$9,200 |
NR |
| Bowl diameter over 6" |
7,108 |
14,388 |
13.00% |
| Pump and bowl assemblies through 36" (all column and shaft lengths, including FM or UL approved vertical turbine fire pumps;deep-well and short coupled pumps, except can and pot type) |
10,593 |
176,198 |
29.9 |
| Can and pot type (pump and bowl assemblies, suction can and pot type) |
1,111 |
39,630 |
23.8 |
|
|
|
|
Reciprocating Pumps
|
|
|
|
| Driven by electric motor, engine or steam turbine, including reciprocating piston, plunger, power-pumps for water flooding or or diaphragm (not air operated) pumps |
694,824 |
$420,207 |
8.20% |
|
|
|
|
Diaphragm Pumps
|
|
|
|
| Diaphragm pumps (air operated) |
NR |
$363,159 |
4.3% |
|
|
|
|
Rotary Pumps
|
|
|
|
| 100 PSI and under designed pressure |
|
|
|
| 10 GPM and under, designed capacity |
431,064 |
$110,823 |
4.60% |
| 11 to 99 GPM, designed capacity |
83,882 |
55,472 |
10.3 |
| 100 to 299 GPM, designed capacity |
18,448 |
48,719 |
1.8 |
| 101 to 249 PSI, designed pressure |
|
|
|
| 10 GPM and under, designed capacity |
78,192 |
23,984 |
3.3 |
| 11 to 99 GPM, designed capacity |
45,150 |
46,418 |
-4.7 |
| 100 GPM, and over, designed capacity |
19,428 |
46,898 |
0.8 |
| 250 PSI and over, designed pressure |
222,608 |
139,767 |
10.5 |
|
|
|
|
|
|
|
|
Domestic Water Systems
|
|
|
|
| Domestic water systems, including drivers |
1,827,721 |
$325,168 |
14.9% |
| Nonsubmersible pump systems (jet and nonjet, including drivers) |
1,160,895 |
172,034 |
12.7 |
| Submersible pump systems, including drivers |
|
|
|
| Up to 1 hp |
452,184 |
95,443 |
25.9 |
| Over 1 hp to 3 hp |
140,008 |
40,720 |
8.7 |
|
|
|
|
|
Domestic Sump Pumps
|
|
|
|
| Domestic sump pumps, 1 hp and under, including drivers |
3,290,814 |
$221,380 |
14.50% |
|
|
|
|
Oil-Well and Oil-Field Pumps
|
|
|
|
| Oil-well and oil-field pumps (except boiler feed) |
NR |
$782,919 |
15.70% |
| Oil-well and oil-field pumps (except boiler feed), value of drivers |
NR |
354,208 |
28.6 |
| Oil-well and oil-field pumps, subsurface pumps for oil-well pumping |
55,759 |
248,937 |
NR |
| Other oil-well and oil-field pumps, including mud pumps (slush pumps) |
24,681 |
179,774 |
NR |
|
|
|
|
Parts and Attachments for Pumps and Pumping Equipment
|
|
|
|
| Aftermarket (spare) parts for centrifugal pumps |
NR |
857,787 |
1.30% |
| Aftermarket (spare) parts for vertical turbine pumps |
NR |
44,387 |
40.4 |
| Aftermarket (spare) parts for reciprocating pumps |
NR |
241,406 |
-3.1 |
|
