Centrifugal Pumps
Filter     Order     Display # 
Article Title Author
Industry Demands and Trends for Magnetic Drive Pumps Daniel Roll, Finish Thompson Inc.
Hydraulic Institute Pump FAQs August 2008 Hydraulic Institute
Pumping Systems for the Mining Industry Mike Dwyer, Quadna, Inc.
Proactive use of Polymer Composites Saves Money and Time Thomas Buckley, Henkel Corporation
Reengineering the Impeller John Kozel, Sims Pump
Intelligent Pumps Last Longer Barry Nicholson, Schlumberger
Oil Sands Pump Cost Considerations Graeme Addie, GIW Industries, Inc.
Hydraulic Institute Pump FAQs May 2008 Hydraulic Institute
Focus on Fundamentals (Part Two): Centrifugal Pumps with an Impeller Between Bearings Dr. Lev Neik, P.E., APICS
Net Positive Suction Head: NPSHR and NPSHA Joe Evans, Ph.D.
Hydraulic Institute Pump FAQs May 2007 Hydraulic Institute
Repair and Upgrade of Multistage Centrifugal Pumps Dr. Lev Nelik, P.E., APICS
Vortex Action: How Lower Efficiency Can Reduce Overall Cost Joe Evans, Ph.D.
Hydraulic Institute Pump FAQs October 2007 Hydraulic Institute
Hydraulic Institute Pump FAQs November 2007 Hydraulic Institute
Hydraulic Institute Pump FAQs April 2008 Hydraulic Institute
Considerations on Electric Submersible Pumps Technology James F. Lea and Saeid Mokhatab, Production & Lift Technology, LLC
Hydraulic Institute Pump FAQs February 2008 Hydraulic Institute Pump FAQs
Focus on Fundamentals (Part One): Centrifugal Pumps with an Overhung Impeller Dr. Lev Nelik, P.E., APICS
What Are Your Pump Options for Lifting Water? Dr. Lev Nelik, P.E., APICS
Parallel Pumping (Part Two): Other Considerations Joe Evans, Ph.D.
Building a Better Boiler Feed Pump Robert Aronen, Dennis Plaizier and Dave Sinclair
Hydraulic Institute Pump FAQs January 2008 Hydraulic Institute
Small Pumps Fix Big Problems for Wastewater Treatment Plants Paul Nelsen, ITT Flygt Corporation
Hydraulic Institute Pump FAQs March 2008 Hydraulic Institute
Self-Priming Pumps for Fluctuating Water Demands Gragg White, Canyon Systems
Parallel Pumping (Part One): Parallel and Not So Parallel Joe Evans, Ph.D.
Hydraulic Institute Pump FAQs 2007 Hydraulic Institute
Optimizing Existing Designs through Cost-Effective Simulation Glenn Dorsch, P.E., and Kent Keeran, Vaughan Company Inc.
 
<< Start < Prev 1 Next > End >>
Results 1 - 29 of 29