Why don’t my PTFE gaskets seal FRP, plastic and other light load flanges?
Topic Sponsor
Top Seals Articles
Find a reliable dry gas seal system for any application.
First of Six Parts
Follow the major developments in seal technology
This month's "Sealing Sense" was prepared by FSA member Larry Sheffield.
Proper safety precautions for selecting, installing and maintaining seal systems
The conformability, flexibility and wide range of material combinations and designs enable packing to seal many difficult, unconventional applications. These capabilities, coupled with other packing systems components, can provide effective sealing solutions that reduce the consumption of valuable water and energy resources.
As we learned last month, carbon/graphite fiber packings have proven to be effective solutions to many common sealing applications. This time, we have learned that flexible graphite packings appear to have become the packings of choice when sealing fugitive emissions, high heat media, and rotating equipment with limited cooling or flush available.
These basic seal system considerations can significantly reduce the energy footprint of the seal face interaction. Their contribution to the overall sealing system energy footprint should be considered after review of all the components of the sealing system's energy footprint.
Maintaining equipment uptime in a mining operation is essential. For one of South American's largest sulfurated copper mining organizations, unreliability simply wasn't acceptable, so they turned to one seal manufacturer to develop a pump sealing system improvement program using the Six Sigma methodology.
Manufacturers of braided packings are often asked to simply supply "A PTFE packing." Though this may seem a straightforward request, it generates questions that must be answered to ensure the correct PTFE packing for the application. A clear understanding of the differences between the various forms of PTFE braided packing will enable a selection of reliable sealing for the pump or valve.
Latest Seals Articles
Why don’t my PTFE gaskets seal FRP, plastic and other light load flanges?
Find a reliable dry gas seal system for any application.
First of Six Parts
Follow the major developments in seal technology
This month's "Sealing Sense" was prepared by FSA member Larry Sheffield.
Proper safety precautions for selecting, installing and maintaining seal systems
Two imperatives for many of today's industrial plants are to reduce the cost of operations through the enhancement of rotating equipment reliability and enhanced energy efficiency of pumping systems.
Modular seal designs do not lessen the need for proper selection of the core seal whether it is a single or dual, unbalanced or dual balanced, ID or OD pressurized, pusher or non-pusher, rotating head or seat and so on.
Mechanical seal failures are usually the symptom and not the cause of maintenance problems, many of which are related to static misalignment. In operation, other forces such as radial loads, impeller balance and cavitation also affect seal alignment.
Running component wear life and failure are primary cost drivers in the rotating equipment industry.
Bolted flange gasket technology continually evolves with new designs and materials that provide more reliable and durable seals. Plant operators can choose from a wide variety of gasket products that meet the needs of each application; however, selecting the optimal gasket product is only half the battle.
Columns and Blogs
In this multi-part series, we will investigate several aspects of centrifugal pump efficiency.
First of Five Parts
Since the original publication of this draft standard in the January 2008 issue of Pumps & Systems, I have received feedback, encouragement, numerous questions and criticism. The draft listed three basic levels of repair.
The McGraw-Hill scientific dictionary [5] states that a volute is "a spiral casing for a centrifugal pump... designed so that speed will be converted to pressure."
