About 900 years before Newton formulated his universal gravitational theory, the Greek philosopher Aristotle espoused something different.
When West River/Lyman Jones Rural Water Systems decided it was time to expand their service area, the task at hand was of enormous scale.
Many pipeline systems throughout the U.S. are in need of maintenance, but this maintenance is often pushed back because there is no way to properly shut down the system.
With continuously increasing energy costs, pump manufacturers must provide energy efficient solutions for fluid transfer.
Two decades ago, EST Associates, Inc. started operations in Needham, Mass., to provide the New England area with environmental sampling and related monitoring services.
Soils with high concentrations of clay and silt can wreak havoc on construction sites, drain pipes, sewers and pumps.
Good suction piping design must eliminate air entrainment in the liquid, minimize friction loss, provide straight and uniform flow at the pump inlet and avoid excessive forces due to pipe strains at the pump.
Pipe supports and piping that are not insulated may become brittle and crack, posing high risk to the piping and structural components.
Last month, we discussed applications of low head axial flow pumps.
Discharge recirculation, pipe strains and gas entrained in a liquid are discussed.
If stress analysis can ensure that piping loads are within ASME limits, why are rubber expansion joints needed?
Today's pipe stress analysis software provides engineers with a tool for designing complete piping systems and performing structural analysis in compliance with ASME and other well-known piping codes.
Corrosive, aggressive soil had eaten through a 35 year old ductile iron pipeline in the Port of Tampa area, causing a multitude of leaks that could not be repaired.
Reducing the causes of friction and choosing the proper pump will increase efficiency and cost-savings.
Polyurethane coating technology is commonly chosen for demanding exterior applications such as bridges, stadiums and other large structures.
An all-inclusive system converts wastewater to consumable water.
Have you ever wondered why the pressure exerted by a column of liquid has absolutely nothing to do with its volume or, for that matter, the geometric shape of its container?
Consider a typical ANSI-dimensioned 1x1.5-6 pump, as discussed in the P&S August article.
In the United States, several long distance pipelines move gasoline from the refineries in the Southwest to the coastal areas in the Northeast.